Manualshelf

User manual

ManualsBrandsAvermedia ManualsComputer equipmentNXU8000 series
41424344454647484950
42
8. Restore AutoPan Time: set a time period for restoring auto path function after the IP PTZ
camera has been moved. Mark the check box and set the time period in second.
9. Others: Enable/disable Using Joystick such as USB joystick device.
10. Iris: To adjust the iris of IP PTZ camera. It may not support that depends on brand of the PTZ
camera.
11. OSD: To allow call out IP PTZ camera factory’s OSD setup menu. The OSD setup menu may vary
that depends on the brand of IP PTZ camera.
12. When is done, click OK to save the setting or Click Cancel, to leave without saving the new
setting.
13. When PTZ camera is enabling, user can control PTZ camera by using the mouse and on screen
PTZ control bar.
14. Click on screen PTZ control icon to call out the control bar.
Single Screen mode with PTZ control icon
16-split screen mode with PTZ control icon