User manual

39
4.13 To Setup the IP PTZ Camera
4.13.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ box.
3. In the Connection Settings section, select the COMPort where the PTZ camera is connected,
PTZ ID number and PTZ camera protocol. Then, click Save to keep the settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the Preset Setting section, select the preset number to assign a number for the PTZ camera
current position. Set the DwellTime (1-60 sec) for how long the PTZ camera stays in that position
before it moves to the next one. If you want to add description, check the Show Preset Name
box and in the Preset Name text box, type the word. When done, click Save to keep the settings.
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ camera
has been moved. Mark the check box and set the time period in second.
8. Others: Enable/disable Using Joystick such as USB joystick device.
9. Iris: To adjust the iris of PTZ camera. It may not support that depends on brand of the PTZ
camera.
10. OSD: To allow call out PTZ camera factory’s OSD setup menu. The OSD setup menu may vary
that depends on the brand of PTZ camera.
11. When is done, click OK to save the setting or Click Cancel, to leave without saving the new
setting.
12. When PTZ camera is enabling, user can control PTZ camera by using the mouse and on screen
PTZ control bar.
13. Click on screen PTZ control icon to call out the control bar.