User manual

19
Name Function
(1) Exit -
Click About to update patch or find about the software info.
To update the patch file, Click Update and select the patch file location – Local
Machine or Server Download.
(2) Volume Adjust the sound volume.
(3) Split Screen
Mode
Select from 7 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows you to
switch and view different camera number.
i
- If there are only 4 cameras, you won’t be able to switch to 9, 16, 13, and 32 split screen
mode.
- The DVR system will save the current operating mode (split screen mode, auto scan, full
screen, and compact mode status) when shutdown DVR application and apply the mode
status for next login.
- When you are in single screen mode, Right click and Drag a square on the area you
want to enlarge.
- When you are in multiple-screen mode, Right click the video screen of the camera and
Drag on where you want to relocate it. To only display one of the video in the multiple-
screen mode, Left click on the video screen you only want to display.
(4) Record Start/stop video recording.
(5) Emap Display the map in each area, and the location of camera/ sensor/ relay and
the warning. (see also Chapter 4.7
)
(6) Network Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection. (see also
Chapter 8
)
(7) Setup Configure the system settings. (see also Chapter 5)
(8) PTZ Access PTZ control panel. Beside PTZ camera, DVR system also support
mega pixel IP camera. (see also Chapter 4.6
).
(9) Preview Switch to Preview/Advanced mode. This allows you to view live camera
display. Press ctrl + F can freeze the live preview video screen. And then,
click Snapshot can save the freeze video screen.
(10) Playback Switch to Playback mode. This allows you to view the recorded video file.
(see Chapter 4.5
)
(11) Status Bar Display the current date, time and hard disk free space.