User manual

15
3.2 NXU8000 series
3.2.1 For New Installation
If the system hasn’t installed any DVR software and NV/NX card, please follow the below steps to
install:
1. Plug USB Dongle into your PC.
2. Place the installation CD into the CD-ROM drive then click Install Surveillance System. And
follow the on-screen instructions.
3.
You may now run the application program. To run the application, click on your PC desktop
or click
Start
>
Programs
>
DSS
>
NV DVR
.
DO NOT un-plug the USB Dongle while the NXU application is operating, it may cause the
application crash abnormally.
3.2.2 For Added Installation
To add more channels for existing DVR system, please follow the below steps to install.
1. Run the DVR application.
2. Plug in USB Dongle to your DVR server.
3. The DVR system will detect it automatically and the driver installation dialog will pop up. Click OK
to install the driver.
4. If user chooses to install driver later, then un-plug the USB dongle and plug in again later for
installing.
5.
After installation completed, the DVR system will restart automatically.
DO NOT un-plug the USB Dongle while the NXU application is operating, it may cause the
application crash abnormally.