User manual

131
Name Function
(14)Snapshot Capture and save the screen shot either in *.jpg or *.bmp format.
(15) Event log Show the record of activities that take place in the system. To filter the
records, select and click the option button to only display Event, System,
Operation, Network or POS.
(16) Auto Scan Start/Stop video screen cycle switch
(17) Full screen Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(18) Alarm Alert and display warning info. Only Administrator-level can reset and turn
on, off and trigger the Sensor and Relay by right-clicking the item in the
Sensor and Relay list.
8.3.1 To Setup Remote Console Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour
data, the system automatically replaces the oldest data. In case you have more than one storage path,
the system automatically saves the data to the next storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click Add. To remove
the selected path, click Delete.
Select the Enable network storage check box to send the recorded video in network-attached
storage. To add network storage, the Internet storage drive/folder must be mapped as Network Driver
in DVR server. Enable network storage first, and then, click Add. In Browse For Folder windows,
select drive C and right click mouse button, select Map Network Drive option.