User manual

130
8.3 Familiarizing the Remote Console Buttons
(1)
(2)(3) (4) (5) (6) (7) (8) (9) (10)
(11)
(13
)
(12
)
(15)
(14)
(16)
(17)
(18)
Name Function
(1) DirectDraw Enhance the video quality.
i
Not all graphic cards can support this function.
(2) Exit Close the Remote Console.
(3) Volume Enable/disable the sound.
(4) Split Screen
Mode
Select from 6 different split screen type to playback the recorded video file of
all the camera, or one camera over the other or alongside on a single
screen.
i
- If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split screen
mode.
- To change the video quality, right-click on the screen and select between High,
Normal or Low.
(5) Record Start/stop video recording.
(6) Emap Display the map in each area, the camera/sensor/relay location and the
warning event. (see also Chapter 4.7
)
(7) Network Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection.
(8) Setup Configure the Remote Console setting. (see also Chapter 8.3.1)
(9) PTZ Access PTZ control panel. Beside PTZ camera, DVR system also support
mega pixel IP camera.(see Chapter 8.4
)
(10) Preview Switch to Preview/Advanced mode. This allows you to view live camera
display.
(11) Playback Switch to Playback mode. This allows you to view the recorded video file.
(see Chapter 8.5
)
(12) Status Bar Display the current date, time and hard disk free space.
(13) Camera ID Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.