User manual

124
Schedule Setting
Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly
or one time. The number from 00 to 23 represent the time in 24-hour clock. The left most column
display the days in a week.
To Set the Schedule Setting:
1. Select the date in the calendar. Use
and buttons to shift the calendar to the left or right.
2. Select the condition you want to schedule in the drop down list.
- Record
Activate all the cameras to start video recording at the set time based on the Recording setting
(see also Chapter 5.3
).
- Backup
Save another copy of all the data at the set time and specified backup path. DVR automatically
updates and only backup the data that are not yet included in the archive.
- Network
Activate DVR remote system to access at the set time. After the appointed time, the Network
function will be disabled. If the Network function is already enabled, the Network function will
not be disabled when the appointed time has ended.
- Reboot
Restart the PC at the appointed time.
i
Make sure the Windows operating system is set NOT to require you to login user name
and password. This way the system will be able to run DVR program.
- Disable Alarm
Deactivate the alarm at the set time temporarily.
3. Specify to either schedule it weekly or one time. Click ~ to make a selection.
4. Click on the blocks to set the schedule Right click the colored blocks. In the Select time dialog
box, click to enable or disable the portion you want to set. Click OK to accept the setting and
Cancel to exit without saving the setting. Or click All to select all. To store the setting, click Save.
To remove the settings, click Clear.