User manual

122
Activate Enable Anonymous Login to remotely access the DVR server without the need of password.
The default of WebCam port is 80.
(8) Voice Phone
Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using
microphone. Make sure both microphone and speakers work before using this feature. If the Talk to
Web-Client is disabled, the person in the DVR server side can only hear the voice from the client side
that is when the WebCam 2-Way Talk button is activated. (See also Chapter 8.1 #6
). The default port
of voice phone is 9999.
(9) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or
domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.
(10) Other Configuration
- UPnP
Enable UPnP function to automatically configure the port setting on the local network. This
function is available when there is UPNP device in the same network. It will write the DVR port
information into the router or other network device
- Enable Original Security Protocol
Enable new version DVR system to accept remote software with former version. For example,
if user uses CMS version 7.1 and connect to DVR server with version 7.3, and then, user has
to enable this option to make it work. It is due to that DVR system has some new security
protocol in DVR with version 7.3 and newer version, and it’s not compatible with old remote
software.
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and click
Add. Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP
and click Delete button. To reset the input, click Clear button.