User manual

5
2.4 Connecting the a TV, Audio device, Sensor and Relay device on NX8000 series
1. Connect one end of the RCA video cable (not supplied) to the TV OUT port and the other end to
the TV video input port. If you are not sure, please refer to the TV user manual.
2. Connect the audio devices to the Audio input port.
3. Connect the sensor and relay device to the sensor/relay interface.
NX8000
RCA cable
T
elevisi
o
n
(Video OUT)
TV OUT
AUDIO OUT
Sensor 1Sensor 4
Alarm 1Alarm 4
(Audio OUT)
Speaker
i
To connect the cameras, please refer to Chapter 5.2
.