User manual

118
setup.
(9) UPS (Uninterruptible Power Supply)
Protect the system from damaging, such as power surges or brownouts. Mark Enable and setup the
Shutdown when capacity below percentage level for DVR to showdown properly when the battery
backup power has reached the setting. Mark Enable and click Setting to setup the Shutdown when
capacity below percentage level for DVR to showdown properly when the battery backup power has
reached the setting.
The UPS device must be connected to your computer (refer to your UPS user’s guide).
i
The UPS application must meet Windows XP or Windows Vista system requirements.
(10) Virtual Keyboard
If the keyboard is not available, you may use the Virtual Keyboard. Just click
to show the virtual
keyboard. For uppercase and lowercase, click shift button.
Camera Setting
Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click
Update to save and apply the new settings, click Exit to exit without saving, and click Default1/
Default2 to revert back to original factory setting.
(1)
(2)
(3)
(4)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the
ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera