User manual

99
5.9.8 To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the
Trigger PTZ Preset Setting dialog box, select the PTZ camera
number then select the Enable check box. Select the position
of the PTZ camera when the alarm is activated and ended. For
the PTZ camera ended point, user also can select one preset
position or Auto Path between preset position group.
5.9.9 To Setup Alarm SOP:
Beside the Alarm SOP check box, click Detail. In the step text
boxes, type the standard protocol when the alarm is activated.
When the alarm is activated, the Standard Operation Procedure
dialog box will appear. Just click Next to see the next instruction,
Back to see the previous instruction, Finish to end and Abort
to terminate.
5.9.10 To Setup CMS Setting
Beside the Send to CMS check box, click Detail.
Click OK to accept the new settings and Cancel to
exit without saving.
1. CMS: Select the camera to enable/disable
sending the video to CMS.
2. Matrix: Select the camera to enable/disable
sending the alarm event video to CMS. The
CMS site need to setup a matrix channel to
receive the alarm event from DVR server
site(please refer to CMS manual for detail)