User manual

57
Enable – Mark the check box to enable the System Controller function.
Model – Select model of the System Controller.
Port – Select the com port that is connected with the System Controller. Click Setup to
configure com port value. The com port value is shown in below table:
Baud rate 9600
Data bits 8
Parity No
Stop bit 1
Flow control No
ID – Set an ID for DVR server (0~99). This ID is a key for communicating between the
System Controller and the DVR server.
i
When the DVR server ID is X, the DVR server can be controlled by System
Controller irrespective of the DVR ID that is selected in System Controller.
¾ Google API Key: Enter the Google API Key that applied from Google webpage(see also
Chapter 4.1.2
). Click Detail and enter API key that will allow user to use Google map to
search the specific location and save the founded location as a map image (see also
Chapter 4.6.1.1
).
i
The Google map function only supported in CM3000 Gold version.
¾ Block window OS hotkey: Deactivate the [Ctrl-Alt-Del] and [Windows] keyboard key
functions.
¾ Auto Login when OS start: Execute the CMS when the operating system is started.
(4) Configuration
Import / Export the CMS system configuration
(5) Attention Please
Check the attentiveness of the person who is monitoring the system. You may set the number of
times the Attention dialog box to appear in a day in Times per day text box. To check the graph
on how fast the person response, click Analysis. When this feature is enabled, the Attention
dialog box would appear. The person who is monitoring the system must enter the same number
that appears from the left box at the right text box and then click OK.
(6) Language