User manual

43
- File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol).
1. Beside the File Transmission via FTP check box, click Detail.
2. In the FTP Setting dialog box, enter the FTP IP, port, user ID and password.
3. Click OK to exit and save the setting and Cancel to exit without saving the setting.
- Start Recording
Record the video from the selected camera.
1. Beside the Start Recording check box, click Detail.
2. In the Alarm Recording Setting dialog box, select the camera to enable/disable video
recording. Enable All to select all cameras.
3. In the Frame Rate selection, select As Setting to record the number of frames based on
the Recording Setting or Max to record the maximum of frames based on the available
speed.
4. In the Stop Recording after text box, set the number in second for the program to
continue recording after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.
- Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated.
Beside the Alarm SOP check box, click Detail. In the step text boxes, type the standard
protocol when the alarm is activated. When the alarm is activated, the Standard Operation
Procedure dialog box will appear. Just click Next to see the next instruction, Back to see the
previous instruction, Finish to end and Abort to terminate.