User manual

36
3.4.2.4 Network Setting
Click Update to accept the new settings, click Exit to exit without saving, and click Default to revert
back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using WebCam, Remote Console, PDA Viewer and Hand Viewer (still image).
To select all the cameras, enable the ALL check box.
(3) DDNS Server Port
Enter the Domain Name and Password. To use this feature, go to http://ddns.avers.com.tw
and
register (also see Appendix A
).Enter the port that is used to connect the DDNS server.
(4) Remote Control Server
Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port
in Port column. The default value is 5555.
(5) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling
adjust bar to set the Quality level and FrameRate level.
(6) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of password
(7) Voice Phone
The Talk to Web-Client is to use the 2-Way Talk feature that allows the client and server to talk via
internet using microphone. Make sure both microphone and speakers work before using this feature. If
the Talk to Web-Client is disabled, the person in the NV DVR server side can only hear the voice
from the client side that is when the WebCam 2-Way Talk button is activated.
(8) Network Time Synchronization
Adjust the NV DVR system time same as network time server. Fill in the Time Server IP address or