User manual

18
3.3.3 Live Playback the Recorded Video
User can playback recorded video immediately while monitoring from the local CMS server if the
recording is enabled.
i
-
Playback function must be enabled. Please go to
Setup
>
Camera
and select the
monitor set and enable the playback function ( see also Chapter 4.3 Camera setup
)
-
Playback doesn’t support on EB series.
1. In Monitor mode, click the preview icon of channel and the channel will start live playback.
i
- The
icon indicates the channel is in live playback mode.
- Move the mouse course to the bottom of screen, live playback control bar will show
up.
2. User can use the live playback control button to operate the playback.
i
- Click channel to switch to full screen mode for operating live playback control button
easily.
- Only supports 4 channel live playback at the same time.