User manual

14
Name Function
(4) Audio Enable/disable audio. When audio is enabled, user will see the audio
icon on screen, click on the audio icon (audio icon will turn to green
)
of channel to hear the sound. Each time only can play one channel’s
audio.
(5) Monitor Name Display name of current monitor set.
3.3.1 Using the Monitor Controller
User can use Monitor Controller to switch different monitor set for monitoring and add/delete the
channel in monitor set.
i
User needs to create monitor set in order to using Monitor Controller. To create monitor set,
please go to Setup > Camera (see also Chapter 4.3 Camera setup
)
1. Click
2. The Monitor Controller window will show up as below shown:
Click to exit from
Monitor Controller
Monitor Sets
Monitor for monitoring
Name of Monitor set
Click to reset the
monitor set switching
Click to apply the
new monitor set
To Add and modify
iMatrix server
Click to extend the sub
Monitor Controller window
i
- The monitor set is gray that indicates the monitor set is selected and been monitored.
- The monitor 1 ~ 4 are purple that indicate the monitor is monitoring.
- Right-click on monitor and select the Recover to reset the monitor.
3. Drag the monitor set from monitor list to the monitor (1 ~ 4) and click
Apply
to activate it. To reset
the monitoring group, click
Reload
.
4. To configure monitor set, click arrow button to expand the sub Monitor Controller window.
5. Select the monitor. The DVR servers are included in the monitor set will list on sub Monitor
Controller window. The lower part of window display all monitored channels in the monitor set.