User manual

101
Name Function
(8) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second. (See also Chapter 5.7
)
(9) Find Next Search for the next event or changes in the motion detector frame. You
can use this when you are using Intelligent Search or Event Search
function.
(10) Event Search Search from the recorded activities that take place in the system (i.e.,
Sensor, Motion, Video Loss, POS) (See also Chapter 5.8
).
(11) Intelligent Search Search the changes in the motion detector frame (See also Chapter 5.9).
(12) Audio Enable/disable audio and adjust volume
(13) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
(14) Watermark
To verify the playback video has not been modified.
Click
to check the video. Watermark verification window will show up
as following:
i
Watermark verification doesn’t support on EB series DVR and the
video that is recorded from IP camera.