User guide

4
Using the DVR For the First Time
A. Install the Surveillance Application
1. Make sure the PC is connecting to your network.
2. Place the software CD into DVD-COM/CD-ROM drive on your PC.
3. Click
Install MXR Client Software
to install. And then, follow the on screen instruction to
complete the installation.
4. After computer restarted, you may now run the MXR Client Software. To run the application,
click on your PC desktop or click
Start
>
Programs
>
DVR
>
DVR Server
>
MXR
.
The PC must use independent graphic card in order to install the MXR Client Software.
B. Connect a DVR Server for Monitoring
1. In order to connect with the DVR server, please change the IP address of your PC to the
network IP segment of the DVR server. The default IP of the DVR server is
192.168.0.1
for
LAN1 (lower LAN port in the back of the DVR) or
192.168.1.1
for LAN2 (upper LAN port in the
back of the DVR). Therefore, please change the IP of your PC to
192.168.0.xxx
or
192.168.1.xxx
depends on which LAN port you connect the DVR.
2. Run the MXR Client Software on your PC. To run the application, click on your PC
desktop or click
Start
>
Programs
>
DVR
>
DVR Server
>
MXR
.
3. Enter the
ID
and
Password
(default is
superuser
/
111111
) to login the MXR Client application.
4. Click (
Setup)
from MXR Client application interface. Enter the
ID
and
Password
(default is
superuser
/
111111
). And then, select
Client Setup
mode. The System Setting
windows will show up.
5. Click
Add
, and then, click
Search
to find the DVR server that you have installed on your
network.
6. Select the DVR server that you want to configure from the search result list and click
OK
. If
search is not found any DVR server on your network, please make sure that IP of your PC is
same as the IP segment with the IP of the DVR server.
7. After select the DVR server, click
OK
to exit the System Setting windows. And then, Click
(
Network)
to connect with the selected DVR server.
8. After connection is made, please change the IP of the DVR server to your network IP
segment. Click
Setup > Network
, and then click
Setting
of the Server IP in Main
Configuration section.
9. Select the IP mode that your network is using --
Using the following IP address (Static IP)
,
DHCP
,
or PPPOE
. And then, enter the necessary parameters according to the IP mode that
user has chosen.
10. After the IP of DVR server has changed, please remember to change back the IP of your PC.
i