User manual

164
- Enlarge Camera View
Switch to only display video in Preview/Advanced mode from where the alarm is activated.
 Retrieve time: set the waiting duration before system switching back to original Preview mode. If
the retrieve time is un-mark, the alarm video will keep enlarging until user switch back to Preview
mode manually.
- Send E-mail
Send an electronic text message. To setup click Detail (see also To Setup Send E-mail).
- File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup click Detail (see also To
Setup FTP).
- Start Recording
Record the video from the selected camera. To setup click Detail (see also To Setup Alarm
Recording).
- Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is activated. To setup click
Detail (see also To Setup Alarm SOP).
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated (see also To
Setup CMS Setting)