User manual

AVerTV 6
4
3.2 Running the AVerTV 6.0 application for the first
time
If this is your first time running the application, the Setup dialog box will appear to
prompt you to scan for channels. (For details, please refer to the section Scanning
Channels).
3.2.1 Scanning for Analog Programs
1. Select Analog TV on the left pane of the Setup dialog box.
Note: Before choosing the signal input, please make sure that your country/region is
correct. For more information, please refer to “Scanning Channels” in Chapter 4.
2. Then you need to select the TV option to search only for air channels, or select
CATV to scan for cable channels if your choice is “Analog TV” in step 1.
(This picture is only for reference.)
3. Click New and the Program List dialog box will appear. Type in the desirable name
and click OK.
4. Click Program Scan for searching for available channels/programs in your area.
5. After scanning, the active TV channels will be listed inside the box. Click Apply to
save the scanned channels.
6. To exit the current dialog box, click OK.