User manual

AVerTV 6

(This picture is only for reference.)

Note: All programs are automatically classified into two categories. (Digital TV and

Digital Radio) Select Digital TV to display TV programs; select Digital Radio to

display radio programs.

4.3.2 Scanning channels (Adding Frequencies Manually)

You can add new frequencies one by one if you do not want to import any existing

satellite channel data.

1. Click the Setup button

and in the Setup dialog box, click the Digital TV icon on

the left pane.

2. Click Edit next to the satellite name where you want to add new frequencies. The

Satellite Information dialog box will appear.

3. Specify the correct frequency, FEC, symbol rate, and polarization.

4. Click Insert.

5. Repeat steps 1 to 4 if you want to add more frequencies.

6. Then check your LNB’s configurations. Please refer to 3.2.3 Scanning Digital

Sallilite Programs for more information.

7. Click OK to exit the dialog box.

8. Select Programs under the Digital TV icon, and click Program Scan to obtain the

program data.

9. Click Apply to save the scanning results.