User manual

AVerTV 6
6
3.2.3 Scanning for Digital Satellite Programs (DVB-S)
1. Select Digital TV on the left pane of the Setup dialog box.
2. Choose the switch type that is used by your satellite system.
(This picture is only for reference.)
3. From the Satellite drop-down list under Input 1, choose Custom… if this input port
DOES receive any satellite signals. Otherwise, choose None.
4. Click Edit to configure the satellite information.
5. In the Satellite Information dialog box, type in the satellite’s name in the Satellite box.
6. Specify the frequencies that you want to scan for available satellite programs.
There are two ways to do this:
 Import the existing frequency data: refer to the section 4.3.1 Scanning
Channels (Importing a Frequency Table) for details.
 Manually add frequencies: refer to 4.3.2 Scanning Channels (Adding
Frequencies Manually) for details. If you add frequencies manually, please
make sure you specify the correct longitude data.
7. Click OK to exit the Satellite Information dialog box.
8. From the LNB drop-down list, choose the appropriate setting.
• None: If you do not use any LNB device, choose this option.