User manual

2
1.2 Front Panel
Name
Function
(1) DVR Power LED
Light when the unit is power on
(2) HDD LED
Indicate the hard disk running state. Light when the HDD is running (Read/Write)
(3) IR Sensor
Receive signal from the remote control to operate the unit
(4) USB 2.0 Port
For pen drive/DVD-ROM connection
(5) Network 1 Indicator
Indicate the status of network 1(Port LAN 1)
(6) Network 2 Indicator
Indicate the status of network 2(Port LAN 2)
1.3 Back Panel
Name
Function
(1) 2* USB 2.0 ports
For USB keyboard, mouse, and other USB devices connection.
(2) VGA Out
Output the video signal to a CRT or LCD monitor
(3) Audio In/Out
- Audio In: Input the audio signal from audio input device such as microphone
- Audio Out: Output the audio signal to a audio out device such as speaker
i
The audio input/output device has its own power supply is necessary.
(4) Sensor In
Support 4 sensor devices
(5) Alarm Out
Support 1 relay device (Relay: 1A @ 125V AC/30V DC)
(6) Gigabit LAN 2 port
- To connect the switch of your network for internet connection, remote accessing,
and connection of IP camera.
- LAN 2 support Static, DHCP, or PPPOE mode.
(7) Gigabit LAN 1 port
- LAN connection only but default assign as a DHCP service port. User also can
connect the IP camera through the Ethernet cable.
- LAN 1 supports Static or DHCP mode.
(8) e-SATA port
For connecting external RAID
(9) 12V DC
Power cable connection