User manual

43
8.1.1 To Setup Remote System Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting. The
setting here applies to Remote DVR only.
i
After changed the DVR system setting, refresh your web browser in order to apply the new
setting to the DVR system.
8.1.1.1 System Setup
(1)
(2)
(3)
(1) Audio mute
Enable/disable to hear audio sound of local DVR. To hear sound, make sure the unit is
connected to an audio output device (ex: speaker). If user recorded video in audio mute
status, there is no sound when playback
(2) NTP Setting
Setup the time auto synchronization.
- Enable NTP
Enable/disable time synchronization automatically through network. The DVR
system will auto synchronize time from NTP servers which user has entered in
following server 1 and server 2 column. The first time synchronize will be 6 hours
later after system power up.
i
When the daylight saving is enabling, the auto time synchronization will be
stopped.
- TIME ZONE:
Select the time synchronization time zone. The time zone will base on GMT
(Greenwich Mean Time) time zone.
- Server 1/Server 2
Fill in the network time server URL or IP address (clock.stdtime.gov.tw or
time.stdtime.gov.tw)