Installation guide

3
B. After the hard disk installation, please connect the cables
and power as the illustration showed
Using DVR System
1. Power on the system. DVR
will check the hard disk status.
If the hard disk is new to the
system, the screen will appear
“
HDD FORMAT YES/NO
”.
2. Press to format hard
disk. And then, user will see
“
HDD FORMATTING
” on the
DVR screen
3. When the DVR screen shows
“
NEW HDD FORMAT
COMPLETED
”, the formatting
is completed
4. When you see the screen,
press to enter the OSD
main menu screen to setup
parameters. After finishing
setup, press to return
to surveillance screens.