Specifications

ManualsBrandsAvermedia ManualsDigital Video Recorders (DVR)EB1104 NET

AVerMedia

EB1104 NET

Real-time Security DVR

Operation Manual

Summary of content (69 pages)

PAGE 1
AVerMedia® EB1104 NET Real-time Security DVR Operation Manual
PAGE 2
PAGE 3
FCC NOTICE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
PAGE 4
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR IMAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION.
PAGE 5
Table of Contents Chapter 1 Introduction .......................................................................................... 3 1.1 Features and Specifications ....................................................................... 3 1.2 Package Content........................................................................................ 5 1.3 Front Panel ................................................................................................ 6 1.4 Back Panel.................................
PAGE 6
3.8.1 OVERWRITE ENABLED ..................................................................... 35 3.8.2 MASTER HDD SIZE and MASTER HDD USED ................................. 35 3.8.3 MASTER HDD FORMAT ..................................................................... 35 3.8.4 SLAVE HDD SIZE and SLAVE HDD USED......................................... 35 3.8.5 SLAVE HDD FORMAT......................................................................... 35 3.9 SENSOR SETUP .......................................
PAGE 7
Chapter 1 Introduction EB1104 NET is a 4-channel video and 1-channel audio stand-alone network DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. The DVR system provides remote real-time monitoring that facilitates a remote user to monitor the screens anytime as long as Internet is available.
PAGE 8
• 1 audio input and 1 audio output • VGA output for LCD monitor display • Front panel buttons and OSD control • Motion-JPEG video compression • Default factory setting to NTSC or PAL • Supports 2 hard drives (not included) • Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 640 x 224 (NTSC), 640 x 272 (PAL) • Display and recording frame rate: Quad mode: 30/25 fps (NTSC/PAL) per channel, total of 120/100 fps (NTSC/PAL) • Scheduled recording (00:00~23:00 set by hour ) • Search for
PAGE 9
1.2 Package Content AVerMedia® EB1104NET Unit 2 Remote Control & Batteries (Optional) 3 Power Cord (*The power cord may vary according to the local electricity system.) 4 Power Adaptor 5 DVR accessories (including 4 screws and 1 Ω hook) 6 Quick Install Guide 7 USB Cable 8 Software CD (Manual is included) 9 Removable hard disk drawer accessories (with spare screws) 1 If there is any damage, shortage or inappropriate item in the package contents, please contact with your local dealer.
PAGE 10
1.3 Front Panel 1. REC : Start video recording. 2. 3. 4. MENU : Open/Close the OSD main menu or subsequent submenus. : Go up one item. : Go down one item. 5. SELECT : (a) Cycle through various options in a selected menu item. (b) Open a submenu 6. : (a) Display Channel 1 in full-screen. (b) Pressing this button is equivalent to entering the number "1" when in the OSD menu. 7. : (a) Display Channel 2 in full-screen.
PAGE 11
CAUTION BEFORE REMOVING THE REMOVABLE OR INTERNAL HARD DISK, POWER OFF THE DVR UNIT FIRST. 17. 18. 19. 20. 21. Removable Hard disk LED Removable Power LED Internal Hard Disk LED DVR Power LED USB2.0 Socket 1.4 Back Panel 1 LAN Socket: Connect a PC and DVR with a RJ-45 cable to allow remote real-time surveillance for both intranet and Internet. 2 Audio IN Slot: Input audio signals from an assigned device. 3 Audio OUT Slot: Connect to a speaker to output the audio.
PAGE 12
1.5 Setting Up the DVR Unit 1.5.1 Installing Hard Drives The DVR unit allows you to install up to two hard drives (a master and slave drive). Before you install hard drives, please decide the priorities of your hard disks. Adjust the jumpers’ settings according to the instructions on your hard disk label before you fix the hard disks. The minimum hard disks capacity should be 40GB/ 7200RPM. Hard disks of the same brand are recommended when you install the hard disks in the DVR.
PAGE 13
Follow the steps to install hard disks inside DVR. The DVR provides a flexible choice to fix either the master hard disk or the slave hard disk inside the DVR. 1. Loosen screws. 2. Remote the upper cover backward and lift the cover. 3. Loosen 4 screws on the hard disk rack. 4. Tighten screws at sides of the hard disk.
PAGE 14
5. Connect the gray IDE cable connector to the hard disk IDE slot, and then connect the power connect to the hard disk power slot. 6. Tighten the 4 screws to fix the hard disk. 7. Tighten the screws. 8. Unlock the removable hard disk drawer before you pull out the removable drawer. 9. To install a hard disk in the removable hard disk drawer,remove the removable hard drive drawer from the case.
PAGE 15
10. Remove the upper cover of the drawer and take the hard disk accessories package out. 11. Connect the power connector to the hard drive as the right picture shows. 12. Connect the hard disk connector into the inner tray’s slot. 13. Close the upper cover of the drawer. Slide the drawer into the removable hard drive case, and lock the drawer. 14. Lock the drawer before you start to use EB1104 NET DVR system. 15.
PAGE 16
In the situation you want to remove the hard disk from the removable hard disk drawer, power off the DVR. Unlock the removable hard disk drawer first. The following chapters will describe the hard disk in a removable hard disk drawer as HDD A and the other hard disk inside DVR unit as HDD B to differentiate the hard disks in the following content.
PAGE 17
1.5.2 Installing a Removable Hard Drive Case in a PC (Optional) For users who purchase an optional hard drive case, please follow the steps to install the case in a PC. 1. Power off your PC and remove the cover of your PC. 2. Remove a front cover and free a 5 1/4” drive bay. Insert the hard disk holder. Mount the hard disk holder, screw up the holder, and connect the IDE slot and power connector from PC’s motherboard. 3. Remove the drawer of the removable hard disk case. Please refer to 1.5.
PAGE 18
1.5.3.1 Basic Devices • Cameras Connect the video output of each video camera or composite video source to the CH1 ~ CH4 connectors. • VGA monitor Connect a VGA monitor to the VGA OUT connector of the DVR unit to use as a display for video surveillance and playback. • Power adapter Plug the provided 110V AC or 220V power adapter into the DVR unit's power socket. • Microphone and speaker Plug a microphone in DVR unit’s audio input socket.
PAGE 19
Connect up to four sensor devices to the terminals that are numbered 1 to 8 at the back panel. Each pair of terminals is for the ground (-) and positive (+) input voltage. For instance: Terminal 1 : Connect to the ground (-) wire of Sensor 1 Terminal 2 : Connect to the positive (+) wire of Sensor 1 .... ....
PAGE 20
Chapter 2 Operating the DVR Unit 2.1 First Time Use Connecting the DVR unit to a power outlet automatically turns on its power. When you install new hard disks in your DVR, the system will detect hard disks status and show “HDD FORMAT SELECT(YES) /MENU(NO)”. Press to format hard disks. V2-0-04 HDD Checking … MASTER 123593 MB SLAVE 123593 MB HDD FORMAT (SELECT) YES/(MENU) NO The system will show “ARE YOU SURE PLAY(FORMAT)/STOP(NOT FORMAT)” to confirm again.
PAGE 21
Sometimes the system has trouble detecting the hard disks, it shows “Turn off and on the DVR” on the screen. Turn off and on the DVR Follow the instruction to unplug DVR. Reboot and the system will show the normal first time use screen. After you format the hard drive(s), please enter the default password before you enter the main menu. The factory default password is "111111".
PAGE 22
in QUAD mode can only be played back in QUAD mode. EACH mode QUAD mode Use the following front panel buttons to select the desired video camera to display in full screen: CH1: Camera 1 CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 Note: The recording mode can be selected in the OSD main menu. 2.2.1 Setting the Video Quality Whether you are under Each Mode or Quad Mode, you can modify the video quality and adjust the video image to a better quality according to the real situation.
PAGE 23
to move the cursor to the video quality item you want to change and click change the value. Repeat the same steps until you finish all settings. Click to to exit the setting screen. When you are under the Quad Mode, you can change the video value setting for all cameras at the same time. The system provides a 9-level video quality setting to see a video quality setting screen. You can modify Hue, value. Press Saturation, Contrast, and Brightness for all cameras.
PAGE 24
2 Press the button. During recording, the screen shows the following: R1 2R R3 4R 8 1 2 EACH REC (S) (T) 2005 /04 /18 17 : 20 : 25 MASTER 18% 3 7 6 5 4 Here is a simple description of the screen item. Screen Items Description 1 Recording status 2 Display mode 3 Recording hard disk. “M” means Master, and “S” means Slave. 4 Recording mode 5 Recording hard disk. 6 Percentage of the used hard disk space 7 Recording time 8 “4R” means “Channel 4 is recording”. 3 To stop the recording, press ▓. 2.
PAGE 25
2 If you want to switch to the other hard drive or search for a range of video recordings, press . The ">" arrowhead cursor will then move up to the top of the screen. 3 Press 4 Press to move down to the recording date and time entries. 5 Press or to move through each item in the recording date and time entries. While on an item such as the month, press button repeatedly to cycle through the numbers, and stop pressing the button when you have reached the desired number.
PAGE 26
9 To fast forward through the video, press . To fast reverse, press . 10 Press to pause playback, or press ▓ to stop playback.
PAGE 27
Chapter 3 Setup Menu MAIN MENU > CAMERA SELECT RECORD SELECT RECORD MODE RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP LANGUAGE SETUP NETWORK SETUP 1234 1234 EACH 30 NORMAL RECORD SCHEDULE v +TTTSSSSSTTTTMMMMTTTTT+ | | | | | | | | | 0 3 6 9 12 15 18 21 24 PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT EN PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT SUB MENU > PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD AUD
PAGE 28
1 Press button to display the OSD main menu. MAIN MENU > CAMERA SELECT RECORD SELECT RECORD MODE RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP LANGUAGE SETUP NETWORK SETUP 1234 1234 EACH 30 NORMAL EN PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 2 Press or to move up or down through the items in the menu. The ">" arrowhead cursor moves as you press these buttons. 3 The first five items in the menu provide selectable settings.
PAGE 29
CH1: Camera 1 You can also press For instance: CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 to cycle through different camera display combinations. (1 2 3 4) : Switch on all camera displays. (1 - - 4) : Switch on camera display 1 and 4 only. (- 2 3 -) : Switch on camera display 2 and 3 only. (- - - -) : Disable all camera displays. 3.2 RECORD SELECT This determines which of the cameras surveillance video will be recorded from. The way to select cameras is the same as CAMERA SELECT.
PAGE 30
3.4 RECORD FRAME RATE This sets the number of images per second of video that is recorded. There are 6 record frame rates for selection for NTSC video system, including 30,15,10,7,5 and 4. For PAL video system, the system provides 5 recording frame rates, including 25,12,8,6,and 4.When you select a larger frame rate, the recording file size will be larger. By default, frame rate is set at 30 fps for NTSC, 25 fps for PAL. 3.
PAGE 31
you prefer to record video only at certain time schedules within a day, you can choose specific recording hours. If the DVR unit is connected to sensor devices, you can also customize the unit to initiate video recording only when the sensors detect an event.
PAGE 32
3.7 SUB MENU The SUB MENU allows you to enable password setup, change the password, system date and time, VGA display settings, motion setup, auto record setup, auto scan setup, audio record and mute setting. SUB MENU > PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE ON OFF NO OFF OFF PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 3.7.1 PASSWORD CHANGE To change the password: 1.
PAGE 33
Note: You will be prompted to enter the password when you attempt to format the hard drive(s) in the HARD DRIVE SETUP menu. 3.7.2 TIME SET TIME 2004/01/10 15:30:25 ^ PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT To change the system date and time: 1. Press or to move through the "YYYY/MM/DD" and "HH:MM:SS " entries. The "^" cursor indicates the entry that is selected. 2. Per selected entry, press repeatedly to cycle through the numbers.
PAGE 34
3.7.4 MOTION SETUP MOTION SETUP >MOTION CAMERA MOTION SENSITIVITY MOTION RECORD TIME ____ 01 05 PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT To change MOTION CAMERA, 1. Press or to move the arrowhead cursor to MOTION CAMERA in the menu. 2. Press the channel buttons to select cameras that you want to setup. To setup all cameras, press . You will see the screen shows MOTION CAMERA 1 2 3 4. Press the same button again to cancel the setting. To setup channel 1 and 4 only, press .
PAGE 35
TIME in the menu. 2. Press repeatedly to cycle through the numbers. The time setting ranges from 5 to 30 seconds. Stop pressing the button when reach the desired numbers. 3.7.5 AUTO RECORD SUB MENU PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP > AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE ON OFF NO OFF OFF PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT AUTO RECORD keeps recording automatically after configuration events by users or an unpredictable electricity break.
PAGE 36
3.7.6 AUTO SCAN SUB MENU PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP AUTO RECORD > AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE ON OFF NO OFF OFF PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT AUTO SCAN cycles the videos of each camera when the system is in EACH MODE. To setup the AUTO SCAN, 1. Press or to move the arrowhead cursor to AUTO SCAN in the menu. 2. Press to switch to ON or OFF according to your demand. Click to exit this menu. 3.7.
PAGE 37
system from someone who intends to interrupt the recording or change the settings. The default setting for the PASSWORD SETUP is NO. Please move the arrow cursor to PASSWORD SETUP and press to adjust the setting to YES, and press to return to MAIN MENU. After the function is enabled, the system will request for the password before you enter MAIN MENU or stop the recording. After the password confirmation, you are able to stop the recording or enter the MAIN MENU to change the setting. 3.7.
PAGE 38
3.7.9 AUDIO MUTE SUB MENU PASSWORD CHANGE TIME SET VGA SETUP MOTION SETUP AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD > AUDIO MUTE ON OFF NO OFF OFF PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT When the DVR is connected to the speaker, it will transmit the audio of a microphone. When DVR is under preview or record mode, you can either turn on the AUDIO MUTE or turn off the speaker if you don’t want to listen to the audio. Otherwise, you may listen to the audio if you turn off the AUDIO MUTE.
PAGE 39
3.8 HARD DRIVE SETUP HARD DRIVE SETUP > OVERWRITE ENABLED YES MASTER HDD SIZE 80072MB MASTER HDD USED 16014MB 20% MASTER HDD FORMAT SLAVE HDD SIZE N/A SLAVE HDD USED N/A SLAVE HDD FORMAT PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 3.8.1 OVERWRITE ENABLED This allows old video recordings on the hard drive(s) to be automatically overwritten with new recordings when hard drive space is full. Press 3.8.2 to enable or disable this feature (i.e., choose YES or NO).
PAGE 40
3.9 SENSOR SETUP SENSOR SETUP > SENSOR RECORD TIME ALARM OUT TIME CHANNEL-1 CHANNEL-2 CHANNEL-3 CHANNEL-4 15 05 TYPE:NORMAL-CLOSE TYPE:NORMAL-OPEN NOT INSTALLED NOT INSTALLED PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 3.9.1 SENSOR RECORD TIME This determines the duration of sensor recording (in minutes) in the event that t he sensor devices detect an event. There are 6 selections to choose from. 3.9.
PAGE 41
3.10 LANGEUAGE SETUP > ENGLISH JAPANESE FRENCH SPANISH POLISH Move the cursor to LANGUAGE SETUP and press on MAIN MENU, you will see a language list. Select a proper language and click to return to MAIN MENU. The language on the screen will turn to your assigned language. 3.11 NETWORK SETUP Please select Network setting on the main menu. Press OSD screen. to see the following NETWORK MENU > ACCEPT CLIENT MAC ADDRES IP ADDRESS SUBNET MASK GATEWAY (YES) AB:E2:C1:D3:EE:B5 61.32.11.15 255.255.255.0 61.32.
PAGE 42
When the system will appear an upper arrow below the digit, click or to select a proper digit. Press to return to NETWORK MENU when you finish entering IP address. Please use a fixed IP when you set up the IP ADDRESS. 3.11.4 SUBMASK Move the cursor to SUBMASK and press to enter the SUBMASK. When the system will appear an upper arrow below the digit, click or to select a proper digit. Press to return to﹪ NETWORK MENU when you finish entering SUBMASK. 3.11.5 GATEWAY to enter the GATEWAY.
PAGE 43
Chapter 4 Connect to a PC EB1104 NET provides a convenient tool to trace back the recorded surveillance video, catch specific images and save as AVI files. With the Playback Application, users can play back the surveillance video, catch images and backup all recorded images easily . 4.1 First Time Use Connecting DVR unit to a power outlet automatically turns on its power.
PAGE 44
Follow the instructions to install the driver: 1. Insert the CD driver into CD-ROM’s plate. Click Install USB Playback Application to install the system. Note: The application supports Windows 2000/XP only. 2. You will see the screen on the right side. 3. Click Next. Follow the steps to finish the installation. 4. Please click Browser.. to change the directory if it is necessary. Click Next to continue the installation.
PAGE 45
5. Click Finish to complete the installation. 4.2 Operating EB-DVR Playback Application Click to run the application. Select the hard disk and then select a proper video system according to your local video system. Click OK. When you install 2 hard disks in the DVR, the master hard disk will be prior to the slave hard disk. Hence, you will see the master hard disk on the top of the HDD list. You will see EB-DVR screen as followed.
PAGE 46
1. Time Slider: Drag the slider right or left to fast search an event. 2. Mute: Click the button to enable audio. When the audio is enabled, the button turns . 3. Volume Slider: Drag the volume slider right to volume up the audio ;drag the slider left to volume down the audio. 4. Back One Frame: Display a backward static frame. 5. Back Play: Play the video backward. 6. Pause: Pause the playback. 7. Play: Play the recorded video. 8. Forward One Frame: Display a forward static frame. 9.
PAGE 47
14. Event List: Display all the recorded events stored in hard disks. 15. Transform to AVI: Record an appointed video and save it as an AVI file. 16. Print: Print the current display. 17. Snapshot: Save the present screen as a BMP file. 18. Version Identification: Press Ctrl + Alt + V buttons to see the product version if you need this when you contact with customer service. 4.2.1 Channel Selection This determines which of the cameras will be displayed on the surveillance screen.
PAGE 48
Record Mode Start Time End Time When you decide which event to play, click to display the video or click to display a recorded dynamic event reversely. Click to search the appointed video. Users can select the forward search mode fast play at 2X, 4X, 8X or 16X speed. Click once to fast play the video at 2X. Click twice to fast play the video at 4X. Click 3 times to fast play the video at 8X. Click 4 times to fast play the video at 16X.Click the same button to cycle through different fast play modes.
PAGE 49
Click click Click to see a forward static play. To see a backward static display, . to pause the playing. 4.2.3 Snapshot Click to save the desired screen as a BMP file. Users can keep a full-screen snapshot or a quad screen snapshot. This service allows to keep static images. 4.2.4 Print Click to print the screen. Users can switch to a specific channel and print out the image during the surveillance. Printing is allowed in a display of full-screen mode or quad-screen. 4.2.
PAGE 50
dealers for server IP. 3. The system will show a security dialog screen, click Yes to continue. 4. Enter your DVR IP and password. Click OK to continue. 5. The remote center screen may vary due to the DVR server quantities. For ONE DVR server users, you will see a 4-CH screen, as the lower-left picture shows. For multiple DVR server users, you will see a dual DVR remote center screen, as the lower-right picture shows. 4-CH remote center screen Dual remote center screen Check 4.
PAGE 51
4.3.1 Status of Functional Buttons and Icons The following table illustrates the status of 4-CH remote center functional buttons. Function Button Color Connect to the network Dark gray This service is available. Yellow The connection is ON Light gray This service is disabled. Dark gray This service is available. Yellow Show DVR State Control dialog DVR State Control Sound Light gray Dark gray This service is disabled. Light gray Disabled Yellow Audio is ON.
PAGE 52
Rewind Forward Fast Forward Stop Auto Frame Rate Tune Manual Frame Rate Tune Light gray Disabled Dark Gray Available. Yellow Rewind Forward Light gray Disabled Dark Gray Available. Yellow Fast Forward Light gray Disabled Dark Gray Available. Yellow Stop Light gray Disabled Dark Gray This service is available. Light Gray This service is disabled. Yellow Auto tune mode Dark Gray This service is available. Light Gray This service is disabled.
PAGE 53
The following table illustrates the status of Dual DVR remote center functional buttons. Function Button Color Connect to the network White This service is available. Yellow The connection is ON Gray This service is disabled. White This service is available. Yellow Show DVR State Control dialog Gray This service is disabled. DVR State Control Sound Dark gray Available Light gray Disabled Yellow Audio is ON.
PAGE 54
Rewind Forward Fast Forward Stop Full Screen Yellow Record Light gray Disabled Dark gray Rewind Forward Yellow Pause Light gray Disabled Dark gray Available. Yellow Fast Forward Light gray Disabled Dark gray Available. Yellow Stop Light gray Disabled Gray This service is available. Yellow Click this button to switch to Full Screen Light gray Disabled 4.4 Using the 4-CH Remote Center When you connect to a 4-CH DVR Remote center, you will see the following screen.
PAGE 55
buttons that control the server. Item9 to Item11 indicate the function buttons on the local client. 1. DVR IP and Speed Information: The browser screen shows DVR server IP and speed information in the screen. : Click to connect or disconnect 2. Connect DVR EB1104 NET server.The button turns yellow when it is connected to the network. The system will show the following Client Connection Manager screen. Enter DVR server’s IP and password. Click OK to connect to DVR. 3.
PAGE 56
Settings\user\Desktop\stream_files” (The storage path may vary according to the real user name.) Stop: Stop the playback or recording. Pause: Click the button to pause the DVR video playback. Rewind Forward: Fast reverse during playback. Play: Playback the video of the camera that is connected to the DVR. For details, check 4.5.2 Playback DVR Events Files from Remote Center. Fast Forward: Fast forward during playback. : Click the button, and the system will tune a proper 9.
PAGE 57
Play: Playback the video of the camera that is connected to the DVR. Fast Forward: Fast forward during playback. 4.5 Using Dual DVR Remote Center When you install 2 DVR severs and connect to the dual DVR remote center, you will see the following screen. The functional buttons on the Dual DVR remote center screen are mainly divided into 3 groups: DVR1, DVR2 and the local playback buttons on the lower screen.
PAGE 58
1. Connect /Disconnect : Click to connect to DVR1 server from a remote client. The button turns yellow when it is connected to the network. The system will show the following Client Connection Manager screen. Enter DVR1 server’s IP and password. Click OK to connect to DVR1. To disconnect the connection, click again. When you connect to a DVR from a remote client via network, please don’t connect your DVR and PC with an USB cable. 2.
PAGE 59
: Click this button to 5. Quad Display Mode show 4 cameras at the same time. When Quad Mode is enable, the button turns yellow . Under a Quad Mode display, you can see the following camera display sequence. 6. Audio : Click to enable audio. When the audio is enabled, the . Drag the volume slider up/down to volume up/down the button turns audio when the audio is enabled. 7.
PAGE 60
Record: Click the button to record the camera that connected to DVR. The default file storage path will be “C:\Documents and Settings\user\Desktop\stream_files” (The storage path may vary according to the real user name.) Stop: Stop the playback or recording. Pause: Click the button to pause the DVR video playback. Rewind Forward: Fast reverse during playback. Play: Playback the video of the camera that is connected to the DVR. For details, check 4.5.2 Playback DVR Events Files from Remote Center.
PAGE 61
When you connect to a DVR from a remote client via network, please don’t connect your DVR and PC with a USB cable. 2. DVR State Control : Click to set DVR2 settings when DVR2 is under viewing mode. You can see the DVR Record Mode and Hard Disk Information on the upper-right corner. You can modify Video Quality, Record Frame Rate, Alarm Out Time, Sensor Record Time, Audio Record, Audio Mute, Recording Schedule, Input Channels, Record Channels, DVR Time on DVR State Control dialog. For details, check 4.5.
PAGE 62
6. Audio and Volume Slider : Click to enable audio. When the audio is enabled, the button turns . Drag the volume slider up/down to volume up/down the audio when the audio is enabled. 7. Local Record and Stop buttons : EB1104 NET DVR provides a local recording function to facilitate a remote user to monitor remotely and record channels on the client PC. Click to start recording. When it is recording, the button turn yellow .
PAGE 63
For details, check 4.5.2 Playback DVR Events Files from Remote Center Fast Forward: Fast forward during playback. Group 3: Local playback buttons on the lower screen 1. Full screen :If you wish to see a larger screen when watching the to switch to a full screen. Right click the mouse to channels, click return to a normal display. 2.
PAGE 64
4.5.1 Setting DVR Control from Remote Center EB1104 NET facilitates you to change the settings anytime anywhere via Internet. When you monitor the cameras from a remote client, you can click to modify all settings as the DVR is under viewing mode. Click to stop the recording task on the server side before you change the DVR settings. Click to show the DVR State Control dialog.
PAGE 65
5. Audio Record: DVR supports one audio record for one camera. Select ON or OFF from the drop-down list. 6. Audio Mute: Select ON or OFF from the drop-down list. When the DVR is connected to the PC speaker, it will transmit the audio of a microphone. When DVR is in preview or record mode, you can either turn on the AUDIO MUTE if you don’t want to listen to the audio. Otherwise, you may listen to the audio if you turn off the AUDIO MUTE. 7. Input Channel: Click the buttons to turn on/off the Input Channels.
PAGE 66
In this dialog, you will see detect the quantities of hard disks in the DVR. The system will automatically show the recording start/end time. Select a proper time between the start time and end time inside Timed Play column. Select a desired hard disk and the time before you click the “Start Timed Play” button. The system will simultaneously show event play numbers and list all events in the lower list.
PAGE 67
4-CH remote center Dual DVR remote center When it is recording, the button turn yellow .To stop recording, click . When you click different buttons to operate local recording files under a 4-CH remote center, you will find the upper icons change. For details, check 4.3.1 Status of Functional Buttons and Icons. 4.5.
PAGE 68
to switch to a full screen. Click For Dual DVR remote center users, click the right mouse button to return to a normal display.
PAGE 69
Warranty Notice LIMITED WARRANTY AVerMedia TECHNOLOGIES, Inc. warrants this product to be free of defects resulting from faulty manufacture or components under the following terms: WARRANTY LENGTH Labor is warranted for (1) one year from the date of purchase. Parts are warranted for (1) one year from the date of purchase. Replacement products will be warranted for the remainder of the one year warranty period or (30) thirty days, whichever is longer.