User manual

AVerTV 6
25
4.7 Modifying a program list name
Surely, you can change a program list name. To rename a
program list, follow the steps described below:
1. Click the Setup
button and in the Setup dialog box,
click Analog TV(or Program) or Digital TV(or Program)
icon on the left pane.
2. Click Advance located in the lower right corner of the
Program Information section. Then the Advance dialog
box will appear.
3. Type the desired name in the Program List Name text box.
4. Press Apply to save the setting and click OK to exit the dialog box. Or press Cancel
to abort the saving.
4.8 Removing Unwanted Channels
If you want to exclude undesirable channels from your channel list, do the following:
1. Click the Setup button and in the Setup dialog box, click Analog TV(or Program)
or Digital TV(or Program) icon on the left pane.
2. Click Advance located in the lower right corner of the
Program Information section. Then the Advance dialog
box will appear.
3. In the Program Information section, select the unwanted
channel and then click Delete. This channel will be
removed and that means you won’t be able to access these
programs anymore.
OR,
If you just want to skip a certain channel, do the following:
1. First, select the unwanted channel in the Program Information section.
2. Clear the Enable check box so that you will not access that channel when
you press Channel Up/Down buttons.
3. However, you can still see the channel in your program list. If you want to watch that
channel again at some point, just select the Enable check box.