User manual

AVerTV 6
22
6. If you want to change the settings of your own file format, click Modify. Or click
Delete to remove the unwanted file format that you created.
7. Click Apply to save the settings and click OK to exit the current dialog box. To abort
this operation, click Cancel.
Note:
1. To determine the length of recording and to choose a destination folder in which to
save the recorded audio, please refer to the section titled Recording Setting in Chapter 6.
2. The codecs are not developed by AVerMedia. Therefore, AVerMedia could not
guarantee the function of MPEG-4 recording.
4.3 Adding and Deleting Channel Groups
Selecting a Channel Group allows you to switch between the channels of the selected
group only when pressing the
Channel Up/Down button. If you want to add or delete a
channel group, do the following:
To add a new channel group:
1. Click the Setup button and in the Setup dialog box,
click Analog TV(or Program) or Digital TV(or
Program) icon on the left pane.
2. Click New and the Program List dialog box will then
appear (as shown on the right).
3. Type in a group name and click OK.
4. Click Program Scan and click Yes to continue the scanning process.
5. Available channels will then be listed in the Program Information and now you can
delete the unwanted programs by clearing the check box.