User manual

AVerTV 6

5. Then click Program Scan to start the searching process.

The application comes with a default frequency table therefore the application will

use this table to search for active channels/programs. If you want to terminate the

searching process, just click Stop.

6. You can check the scanning progress from the progress bar. After scanning, the active

TV/Radio channels will be listed inside the box. Click Apply to save the scanned

channels.

(This picture is only for reference.)

Note: All programs automatically classify into two categories (Digital TV and Digital

Radio). Select Digital TV from the Program information drop list to display TV

programs; or select Digital Radio to display radio programs.

4.1.2 Scanning Channels (For Advanced Users)

1. Click Advance located in the lower right corner of the Program

Information section. Then the Advance Program Configuration

dialog box will appear.

2. When there are channels missing from the channel memory,

select All Frequencies or Single Frequency.

3. Once you select Single Frequency, you need to specify the

correct Frequency, for example 533000 (KHz), and Bandwidth.

4. Then click Scan.

5. After scanning, new active channels/programs will be

memorized and listed in the left pane of the dialog box.

6. Click Apply to save the scanned channels.