User manual

AVerTV 6

◆ Or you can right click on the TV monitor, point to Sleep and select the desired

mode. Then right click on the TV monitor again, point to Sleep and choose an

execution time. The time setting will be displayed on the TV monitor. For details,

please see the description below.

Time setting mode Description

Now Your computer will go into the selected mode in about 10

seconds.

Sleep 30/60/90/120 Minute(s) Your computer will go into the selected mode in

30/60/90/120 minutes.

Cancel Your computer will return to original settings.

3.11 Setting time for turning on the Application

If your product with a remote control, this function allows you to turn on the application

at a preset time.

1. Press the Wake Up button (the green one) on the remote control.

2. A dialog box will be displayed on the center of the screen.

3. Set the time you want by pressing the Wake Up button continuously. (For more

information, please refer to the table below.) Then the application will be turned on

automatically at the time you want.

Description

Cancel Wake Up Disable the Wake Up function.

Wake Up after

30/60/90/120 min(s)

The application will be turned on in 30/60/90/120

minutes.

3.12 Minimize the Application

To minimize AVerTV 6 application to the system tray (notification area), click the Setup

button

and in the Setup dialog box, click Miscellaneous icon on the left pane. Then

Select the Minimize to Tray check box. Otherwise clear the check box to minimize the

application to a taskbar button.