User manual

103
- PTZ preset point
- Position the PTZ camera based on the preset point setting.
Next to the PTZ preset point check box, click Detail. In the
Trigger PTZ Preset Setting dialog box, select the PTZ camera
number then select the Enable check box. Select the position
of the PTZ camera when the alarm is activated and ended.
For the PTZ camera end point, user can also select on preset
position or Auto Pan between preset position groups.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video
to CMS when the alarm is activated. Next to the
Send to CMS check box, click Detail. In the CMS
Setting, select the camera to enable/disable
sending the video to CMS. Enable All to select all
cameras. Then, click OK to accept the new
settings and Cancel to exit without saving.