User manual

4
1.3 Front Panel
Name Function
(1) DVR Power LED
Light when the unit is power on
(2) HDD LED
Indicate the hard disk running state. Light when the HDD is running (Read/Write)
(3) IR Sensor Receive signal from the remote control to operate the unit
(4) USB 2.0 Port For pen drive/DVD-ROM connection
(5) Network 1 Indicator Indicate the status of network 1(Port LAN 1)
(6) Network 2 Indicator Indicate the status of network 2(Port LAN 2)
1.4 Back Panel
Name Function
(1) 2* USB 2.0 ports For USB keyboard, mouse, and other USB devices connection.
(2) VGA Out Output the video signal to a CRT or LCD monitor
(3) Audio In/Out - Audio In: Input the audio signal from audio input device such as microphone
- Audio Out: Output the audio signal to a audio out device such as speaker
i
The audio input/output device has its own power supply is necessary.
(4) Sensor In Support 4 sensor devices
(5) Alarm Out Support 1 relay device (Relay: 1A @ 125V AC/30V DC)
(6) RS-485 For future function, does not support now.
(7) Gigabit LAN 2 port To connect the switch of your network for internet connection, remote accessing,
and connection of IP camera.
(8) Gigabit LAN 1 port To connect the switch of your network for internet connection, remote accessing,
and connection of IP camera.
(9) e-SATA port For connecting external RAID
(10) 12V DC Power cable connection