User manual

73
7.1.1.5 Network Setup
(1)
(2)
(3)
(4)
(5)
(1) Transmitting Cameras
Select the camera to disable/enable camera can be view from remote site.
(2) Network Type
Select the IP Mode – Static IP, DHCP, or PPPOE
- Static IP: Assign a fixed and global IP address for the DVR system
9 IP: Assign a constant IP address which real IP addresses from ISP.
9 Mask: Enter the subnet mask of the IP address which user has assigned to DVR
system.
i
It is a bitmask used to tell how many bits in an octet(s) identify the sub network, and how
many bits provide room for host addresses.
9 Gateway: Enter the network gateway IP address
9 DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. It will translate the domain name into IP address when DVR system
request.
- PPPOE
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in
Ethernet frames. It is used mainly with ADSL services.
9 User ID & Password: fill in the user account and password that user applied from your
ISP for PPPOE connection.
- DHCP: Assign the IP address by local DHCP server to DVR system.
i
The Dynamic Host Configuration Protocol (DHCP) is a set of rules used by a
communications device (such as a computer, router or networking adaptor) to allow the
device to request and get an Internet address from a server which has a list of addresses
available for assignment.
(3) DDNS
DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for