User manual

53
Name Function
(17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 4.3.7
)
(18) Sound /Sound bar
Turn on and off the sound
Increase and decrease the volume
(19) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
(20) Watermark
- When playback *.dvr file, click watermark button to verify the correction of
playback video.
- When playback file from hard disk and *.avf file, click watermark to call out
ImageVerification application. (see also Chapter 5)
4.3.1 To Cut and Save the Portion of the Recorded Video
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation, click Segment button again.
3. Click Output button to save the wanted portion.
4. In the Save As dialog box, locate on where user wants to save the file, type the filename, and
select the video format.