User manual

23
2.3.1.4 To Set a Video Segment and Save
Keep a portion of the recorded video. Following the below steps to Set and Save the Wanted
Portion of the Recorded Video
1. While playback, right-click on playback screen and the A point of video segment is set.
2. Right-click on playback screen again to set B point of video segment.
3. The DVR system will start repeat playback the video segment that user has set until user cancel
the video segment. Right-click on playback screen will cancel the video segment.
4. To save the video segment, left-click on playback screen to switch to single screen mode.
5. Plug in the USB storage device.
6. Click
and select
Segment
from playback menu.