User manual

14
Step 4. Setup Record Schedule
Setup the
Schedule
to record.
i
Without setting record schedule, the DVR system wouldn’t start to record.
1. Click
→ Setting → Schedule → System
2. Select the date and type of record (Weekly, Month, or None).
3. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours
table.
4. Click
Save
.
5. Click
Record
tab.
6. Select the record mode (
Always
,
Motion
,
Sensor
, or
Smart
).
7. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and hours
table.
8. Click
Save
and
OK
to complete the record schedule setting.
9. To start recording, click (record) button.