User manual

Name Function
(12) Event log Show the record of activities that take place in the system. (see also
Chapter 2.2.2
)
(13) AutoScan Start/Stop video screen cycle switch.
(14) Full screen View in full screen. To return, press the right button of the mouse or ESC
on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle
to only display one of the video in the multiple-screen mode or all.
(15) Alarm Alert and display warning info. Only superuser can reset alarm status.
Click the arrow icon to exit
from full screen display
mode
2.2.1 Familiarizing the Buttons in PTZ Camera Controller
(1)
(11)
(2)(3)(4)(5)
(6)
(7)
(8) (9) (10)
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Configure PTZ cameras.
(3) AutoPan
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera.
(7) Camera ID pane Display the PTZ camera number that is being operated.
(8) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and click the
preset position number and save it.
(9) Camera lens
speed controller
Adjust the moving speed of the PTZ camera lens.
(10) Camera preset
position number
Move the PTZ camera to the preset point.
(11) Group AutoPan Select to automatically operate PTZ camera in group.
17