User manual

2.2 Familiarizing the Buttons in Preview Mode
(15)
(14)
(13)
(12)
(11)
(10)
(9)
(8)
(7)(6)(5)(4)(3)(2)(1)
Cam01
Cam05 Cam06 Cam07 Cam08
Cam04
Cam03
Cam02
Name Function
(1) Exit
Reboot: To restart the DVR system. It is required to enter the password
Power Off: To shut down the DVR system. It is required to enter the
password
Login: Using different ID to login to DVR system.
Cancel: To return to DVR application.
(2) Split Screen Mode Select from 4 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows you to
switch and view different camera number.
i
– The gray buttons do not have function.
– When you are in single screen mode, Right click and Drag a square on the area you want to
enlarge.
– When you are in single and full screen mode, partial enlarges does not support.
(3) Record Start/stop video recording.
(4) Network Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection. The default is
enabling.
(5) Setup Configure the system settings. (see also Chapter 3)
(6) PTZ Access PTZ control panel. (see also Chapter 2.2.1)
(7) Preview Switch to Preview/Advanced mode. This allows you to view live camera
display.
(8) Playback Switch to Playback mode. This allows you to view the recorded video file.
(see also Chapter 2.3
)
(9) Status bar Display the recorded date, time, hard disk space and temperature of unit.
(10) Camera ID
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view other
camera.
(11) Snapshot Capture and save the screen shot in *.jpg format.
16