User manual

5.
The hard disk must be formatted before user can use it with DVR unit. Following the below steps
to format the hard disk.
a. Click
Setup
and enter the password
b. Click
System
→
Add
c. Select the hard disk from device list and select
Format type
d. Click
Format
button to start formatting
e. When formatting is done, click
OK
.
6.
Setup the date and time in order to have correct recording time and date. Following the below
steps to setup date and time:
a. Click
Setup
and enter the password
b. In
Time
section, click
Setting
button of
System Time
.
c. Select the date and adjust the time, and then, click
OK
.
7.
Connecting the IP camera. Following the below steps to connect the IP camera.
a. Click
Setup
→
Camera
b. Select camera icon and enable the camera
c. Click
IP Setting
d. Enable
Protocol
, and then, select
protocol
,
mode
,
video format
,
resolution
, and
channel
of IP camera.
e. Enter
IP address
or
URL
of IP camera.
f. Enter
ID
and
password
if IP camera’s access authority is required.
g. Click
OK
.
h. To connect another IP camera, follow the above steps.
15