User manual

88
7.3 Familiarizing the Buttons in Remote Console
(1)
(2)
(3) (4) (5) (6) (7)
(8) (9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Name Function
(1) DirectDraw Enhance the video quality.
i
Direct Draw function supports for certain VGA card. For more information, please contact your VGA card
vendor.
(2) Exit Close the Remote Console.
(3) Audio button Enable/disable the sound.
(4) Split Screen Mode Select from 6 different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
(5) Record Start/stop video recording.
(6) Network Enable/disable remote system access. This feature allows you to access DVR server from
a remote location via internet connection.
(7) Setup Configure the Remote Console setting. (see also Chapter 7.3.1)
(8) PTZ Access PTZ control panel. EH supports IP camera PTZ function.(see Chapter 7.3.2)
(9) Preview Switch to Preview/Playback mode. This allows you to view live camera display.
(10) Playback Switch to Playback mode. This allows you to view the recorded video file. (see also
Chapter 7.4
)
(11) Status Bar Display the current date, time and hard disk free space.
(12) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
(13) Event Log Display the Event logs, Operation logs, System logs, and Network logs.
(14) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format.
(15) Full screen Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(16) Alarm Alert and display warning info. Superuser and user both can reset the alarm.