User manual

26
Name Function
(7) Playback Switch to Playback mode. This allows you to view the recorded video file.
(8) Status bar Display the recorded date, time and play speed.
(9) Camera ID
Show the number of cameras that are being viewed. When you are in single screen mode, click
the camera ID number to switch and view other camera.
(10) Export
Export includes Snapshot, Output Video Clip, and Backup function.
Snapshot: Capture and save the screen shot either in *.jpg format.
Output Video Clip: Save the segmented file in *.dvr format to external USB storage device.
Backup: Save the playback file to USB device or DVD-ROM disk(see also Chapter 3.6)
(11) Segment
Keep a portion of the recorded video.
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause
on where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause
on where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
3. Click Export button → Output Video Clip to save the video segment to the USB storage
device.
(12) Full screen
View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click
the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of
the video in the multiple-screen mode or all.
(13) Event log
Show the record of activities that take place in the system. To filter the records, select and click the
option button to only display Event, System, Operation, Network or All.
(14) Bookmark
Mark a reference point when reviewing the recorded video file to which you may return for later
reference (see also Chapter 2.3.1
).
(15) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(also see Chapter
2.3.2)
(16) Find Next
Search for the next event. You can use this when you are using Event Search function.
(17) Event Search
Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion, Video
Loss)
. (see also Chapter 2.3.3)
(18) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.