User manual

9
screw hole, then, you may adjust the hard disk position
to fit the screw hole.
7. The look of three hard disks is installed on hard disk
plate.
8. Plug the SATA cable into SATA connector on the PC
board. If user installs three hard disks, then plug three
SATA cables into each SATA connectors on the PC
board.
9. Plug the power cable into hard disk
10. Plug the SATA cable into hard disk
i
- User can leave un-plug the SATA cable of the left
side HDD for screwing plate inside the DVR more
easily later.
- The 3
rd
SATA cable is an optional accessory.
Please purchase from your dealer.
These 2 SATA connectors
are for eSATA connector
and DVD-ROM.