Service manual

Service manual for EH5216+
22
Step 17. Once the front panel has been removed, please remove the 3 PCB
boards from the plastic case. Unscrew total 10 screws from the 3 PCB boards.
Step 18. After the front panel has been removed from the DVR, the USB PCB
board has to be removed from the metal case by unscrewing 3 screws. Please
refer to the following pictures.
Step 19. The last remaining PCB board inside the metal case holds the front
panel power button and the power- / HDD-LED indicator. Please disassemble
it by unscrewing 4 screws.