2010 AVerMedia ® AVerDiGi EH5216+ Service Manual ® AVerMedia AVerDiGi EH5216+ Version 1.
Service manual for EH5216+ Table of contents 1. Version history of service manual ………………………………………...3 1.1. Version history……………………………………………………………………………….3 2. About this service manual ……………………………………………………...4 2.1. Legal information & disclaimer…………………………………………………………….4 2.2. Technical specifications…………………………………………………………………….5 3. Parts list …………………………………………………………………………………….8 3.1. Main modules………………………………………………………………………………..8 3.2. Screws and other parts……………………………………………………………………11 3.3.
Service manual for EH5216+ 1. Version history Version Released date 1.
Service manual for EH5216+ 2.About this service manual. 2.1 Legal information & disclaimer. Initial information This guide is a troubleshooting reference used for maintaining and servicing the DVR EH5216+. It provides comprehensive information on identifying DVR features, components, and spare parts; troubleshooting DVR problems; and performing DVR disassembly procedures. The target users of this document are our value customers and customer service teams.
Service manual for EH5216+ 2.2 Technical specifications. Please refer to the following general technical specifications for the EH5216+ DVR. Electrical specifications Camera Inputs (analog) 16 BNC connectors Camera Inputs (IP) 16 CH MPEG4/ JPEG /H.
Service manual for EH5216+ PiXORD, PELCO, Apron, Lilin and more Audio Inputs 16-ch line-in signal,8 KHz sampling rate (optional) Audio Output 1-ch line-out signal Microphone Input 1-ch line-in signal Alarm Inputs 16 Input voltage: max. 6 VDC Relay Outputs 4 Voltage range: 125VAC - 30 VDC Switching current: max.
Service manual for EH5216+ Operating temperature 0 °C to +40 °C (32 ° to 104 °F) Storage temperature -30 °C to +60 °C (-22°F to 140 °F) Relative humidity in operation 50%-80% Relative humidity when stored 90% Electromagnetic Compatibility (EMC) USA FCC Part 15, Class A EU EN 55011(Group I, Class A) EN 61000-3-2: 2000, Class A Safety EU EN 60950-1: 2001+A11:2004 7
Service manual for EH5216+ 3. Parts list. 3.1 Main modules. Part number Part description 51F2X8NP00AD GM_EH5216 LITE_AVI_0_VER Picture B 51C2A9NP00AG GM_SEB5116_AVI_0_VIDEO IN 51C2A9NP00AC GM_SEB5116_AVI_0_IR 51C2A9NP00AH GM_SEB5116_AVI_0_POWER 51F2X8NP00AB GM_EH5216_AVI_0_USB 51C2A9NP00AB GM_SEB5116_AVI_0_FUN.
Service manual for EH5216+ Part number Part description Picture 51C2A9NP00AD GM_SEB5116_AVI_0_CONTRO L 51C2A9NP00AB GM_SEB5116_AVI_0_FUN.
Service manual for EH5216+ Part number 064AOTHERBFJ Part description Picture CABLE-SERIAL ATA CABLE-500mm 064ASATA-BDV CABLE-SATA TO E-SATA-40CM 067AG252PAAV WIRE-2.5*2P-15CM-JIE LI 064AOTHERBGA 208AC2F1-ADX CABLE-UL2651-16C-150mm 電線固定板 PLASTIC- (FWA-22C) 041312GOOAK3 ADAPT-AC/DC-100V~240V/19V -4.
Service manual for EH5216+ 3.2 Screws and other parts. Part number Part description 207AAAAAAAAN PSUPOT-TH11-11mm 100AAAAAAAEG SCREW_MU_I 100AAAAAAADD SCREW-MU-M3*4 100AAAAAAAH5 100AAAAAAADH ㎜_NI_尾 TP1 頭_T_M2.6*8 扁頭 頭_T_1.7*5 ㎜ _NI_頭徑 4.
Service manual for EH5216+ Part number 100AAAAAAAFD Part description SCREW_MU_P _NI_ 100AAAAAAAG6 尾 TP1 SCREW_MU_I _NI+ 頭_T_3*8 ㎜ Picture 頭_M_3*5 ㎜ 耐落_頭徑 5.
Service manual for EH5216+ 3.3 Outside case and other parts.
Service manual for EH5216+ 4. Disassembly & Assembly procedures. 4.1 Tools needed for disassembling and assembling the DVR. 4.2 To disassemble / assemble the DVR. Step 1. Initially, please have unscrew the 8 screws of the outer case. These are located in left, right and back side of this DVR. Please see the following pictures for details.
Service manual for EH5216+ Step 2. Remove the outer case after unscrewing the 8 screws. Step 3. Afterwards, please remove the iron protection steel by unscrewing two mounting screws. See the following pictures. Step 4. Please remove the HDD iron rack.
Service manual for EH5216+ Step 5. After removing the HDD iron rack, the inside of the DVR will reveal itself as following. Please use the pictures below as a reference and remember the correct cable connections for further disassembling. Step 6. The next step includes the removal of all power cables (i.e. SATA / e-SATA / main power cable ) by unscrewing the two screws from the e-SATA interface on the back of the DVR. Accordingly, please unmount all power cables from the PCB board.
Service manual for EH5216+ Step 7. Please remove the power / SATA cables from the main power board, DVD-ROM drive and PCB board. Please see the following pictures for the detailed removal procedure. Step 8. In the next step please remove all remaining connection cables from and to the PCB board inside the DVR. Those cables are the one coming from the front panel (Yellow, green, blue and 3 thick black cables), front panel power board, video in BNC board and two fans – including cables.
Service manual for EH5216+ Step 9. You may see the following pictures revealing the exact connection position of the cables you are about to remove. Step 10. After removing all the cables insides the unit, please start removing the PCB boards. Initially, please remove the video-in BNC board. It is being mounted to the back of the DVR through 6 screws.
Service manual for EH5216+ Step 11. After removing the video-in BNC board, please remove the main power board located next to it. Please refer to the following pictures. Step 12. Once the main power board has been removed, please follow up by disassembling the main system PCB board - the biggest PCB board inside the unit. Please unscrew all remaining screws from the back of the DVR and make sure to removing the two fans before taking out the main PCB board. Please see the following pictures.
Service manual for EH5216+ Step 13. The 2 cooling fans may be un-mounted by unscrewing 4 screws, as you can see from the following pictures. Step 14. The system PCB board is mounted inside the case with 9 screws. Please unscrew them and take out the board.
Service manual for EH5216+ Step 15. This step reveals the removal procedures of the front panel of the DVR. Please loosen the lace which holds the connection cables of the front panel. Step 16. The front panel is secured through 3 screws. Please remove these and unplug the connection cables coming from the PCB board. The pictures below reveal the details.
Service manual for EH5216+ Step 17. Once the front panel has been removed, please remove the 3 PCB boards from the plastic case. Unscrew total 10 screws from the 3 PCB boards. Step 18. After the front panel has been removed from the DVR, the USB PCB board has to be removed from the metal case by unscrewing 3 screws. Please refer to the following pictures. Step 19. The last remaining PCB board inside the metal case holds the front panel power button and the power- / HDD-LED indicator.
Service manual for EH5216+ Step 20. The final step reveals the removal of the internal DVD drive. To do so, please unscrew the 4 screws, which hold the drive inside the metal case.
Service manual for EH5216+ Step 21. Please see the following pictures, which show the completely disassembled DVR and all of its components.
Service manual for EH5216+ 5. Troubleshooting Procedures 5.
Service manual for EH5216+ 5.1.1 DVR does not boot up? Start Reseat AC adapter in DVR and wall outlet DVR booting – check front Y Done Y Done LED & FAN N Try different wallpower-outlet DVR booting – check front LED & FAN N Try different ext. AC adapter (if applicable) DVR booting – check front Y Replace external AC-adapter LED & FAN N Open DVR – check for loose cables, reseat cables, close DVR and retest DVR booting – check front LED & FAN N Replace following items if available: int.
Service manual for EH5216+ 5.1.
Service manual for EH5216+ 5. Troubleshooting Procedures 5.
Service manual for EH5216+ 5.2.1.
Service manual for EH5216+ 5.2.2. No camera (IP camera) display? Start Check cable link and set camera & DVR-CH settings to default Video output OK? Y Done N Use computer (IE) to test camera display Check DVR network settings and Y Video output OK? try to reach DVR through PC N IP-camera problem; Re-check camera network connection Video output OK? Y or exchange to Done another camera N Check IP-cam support-list for camera model and supported connection modes.
Service manual for EH5216+ 5.2.3. No network? Start Check if network funct. is enabled in DVR software NW-connection OK? Y Done Y Done N Reseat network cable in DVR jack and router.
Service manual for EH5216+ 5.2.4. DVD backup not working? Start N DVD tray opens? Shut down DVR, open the unit and reseat Y DVD-drive power cables. Re-test. Ensure inserted media is an empty DVD-R/DVD+R, DVD tray opens? DVD-RW/DVD+RW Use different SATA power cable & Y disc. Use different disc for cross-checking.
Service manual for EH5216+ 5.2.5. No audio? - Check audio connectors and reseat cables - Check volume level of connected speakers - Enable audio recording in DVR menu - Check volume/mute settings in DVR software 5.2.6.
Service manual for EH5216+ 5.2.8.
