User manual

10
1.5.2 Install Internal SATA Hard Disk
User can install up to 3 SATA hard disks inside the DVR unit if it is necessary. Please follow the
below steps to install the hard disk.
1. Loosen all screws and push the cover backward
and lift
2. Loosen the screws of holder in order to take out
the hard disk rack.
3. Take out the hard disk rack from DVR unit and
slide the hard disk into it.
4. Secure the hard disk both side
5. Plug the SATA cable into SATA connector on the
main board
6. Plug another side of SATA cable into hard disk