User manual

113
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
9.2.2.3 Record Setting
In the Recording setup windows, click OK to accept the new settings, click Exit to exit without
saving, and click Default to revert back to original factory setting.
Record Setting of IP Camera
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable
the ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns purple when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block 1 to 7
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a
week, select the recording mode and click the ~ button. If you want to only record at a particular
time or day, click Schedule button and select the Recording Mode , and then click on the time or
day blocks. When the system starts recording a red triangle mark would appear at the upper left
corner of the screen.