Specifications

16
OSD MENU Description
2006 / 04 / 20
17 : 54 : 50
ON
ON
ON
OFF
NO
SUBMENU
PASSWORD CHANGE
VIDEO ADJUSTMENT
DATE
TIME
AUTO RECORD
AUTO SCAN
PASSWORD SETUP
AUDIO RECORD
AUDIO MUTE
NTSCVIDEO SYSTEM
AUTO RECORD :
Enable/disable auto continue recording when
interrupted (i.e., power breakdown, video playback or
configuration setup). It continue recording after 10
second of idleness. This is applicable in Always Record
mode.
AUTO SCAN :
Enable/disable auto cycle switch to display the next
channel when in full screen preview.
PASSWORD SETUP :
Enable/disable full system password protection. This
would prevent unauthorized user to stop video
recording, change system settings and formatting the
hard disk.
AUDIO RECORD :
Enable/disable audio recording. To record sound,
make sure the microphone is connected to the unit.
AUDIO MUTE :
Enable/disable to hear audio sound. To hear sound,
make sure the unit is connected to a speaker.
i
If you want to hear the voice when you
playback the recorded file on this DVR,
please make sure that you have selected
Audio Mute Off.
VIDEO SYSTEM:
Display the current video system ─ PAL or NTSC
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HD1 SIZE 37 GB 78MB
HD1 USED 0 GB 232MB 0%
HD1 FORMAT
HD2 SIZE 0 GB 0MB
HD2 USED 0 GB 232MB 0%
HD2 FORMAT
* HD1//HD2 SIZE shows the total
capacity of the hard disk.
* HD1/HD2 USED shows the amount
of space that has been used.
OVERWRITE ENABLED :
Enable/disable replacing the earliest record when the
hard disk space runs out. By default, the HDD overwrite
setting is enabled.
HD1 FORMAT / HD2 FORMAT :
For security purpose, you may have to enter the
password to format hard disk.
To format hard disk:
1. Use the and or and
buttons to go up and down and select
HD1
FORMAT
. Then press or
2. In the CHECK PASSWORD screen, press
or . Then use the and or
and buttons to select the security
combination number. Press or
button again to make the selection. Repeat till you
key in the last number.