Specifications

54
Camera Select window.
5. Select the camera that user wants to add, and then click Add button. The camera will
be added to Monitor Layout window. User can add up to 64 cameras by select the
camera display format from 4x4, 5x5, 6x6, 7x7, and 8x8 format. To remove the
camera from the Monitor Layout window, select the camera and click Delete button.
To delete all cameras, click Clear All button.
6. To record the cameras video, mark the Record box. Otherwise, the cameras video
will not be saved on the CMS system hard disk. When playback the recorded camera
video, user need to select the DVR server.
7. Click OK to save the setup. To exit without saving, click Cancel.
9.4.4 E-MAP Setup
Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can
add a map on another map. User also may add the DVR icons on the map.
9.4.4.1 To Set Up the E-Map
1. Click Setup.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click E-Map.
4. The E-Map interface will show up in second monitor if user is using multiple
monitors for the CMS system. If user is using single monitor for the CMS
application, the E-Map interface will show up in front of the CMS application
interface. Press Esc to switch back to CMS application interface or press F3 to
switch to E-Map interface again.
5. On the E-Map interface:
- (1) go back to previous layer of map
- (2) Show the current name and layer of map
- (3) Load a map to replace the current map
- (4) Add a new map. The new map is added on the current map as a next
level.(See Add a New Map)
- (5) Display the selected Map or DVR server information.
- (6) Add a DVR server icon on the map. (See
Add a DVR Server)
- (7) Click OK to save the setting and exit the E-Map interface.
- (8) Click Cancel without saving the setting and exit the E-Map interface.