Specifications

50
Name Function
i
To get the serial number, please contact your local dealer and give activator
key of product. And then, user will have the serial number to complete
product registration and also CMS system will be upgraded to 1000 DVR
servers management.
(1) Exit
(2) Monitor (F4) Switch to display live video from the selected DVR servers group. If user is using a
single monitor, press ESC to revert back to the CMS main application.
(3) E-map (F3) Switch to display the map and show the location of the NV DVR server on the map.
If you are using a single monitor, press ESC to revert back to the CMS main
application.
(4) Network Enable/disable the remote alarm data received. This is activated automatically when
the CM software starts up. The network is using port 80 so please make sure you
are not running any web server or application that locks port 80 on the PC with the
CM3000 software.
(5) Setup Configure the CMS system settings. Only the administrator is authorized to access
this command. (see also Chapter 9.4.1)
(6) Playback Select to playback video from the local hard disk or remote DVR server.
(7) Event log Show a record of activities that has taken place in the system (see also Chapter
9.5.4 ).
(8) Status Display the current date, and time
(9) Log extender Expand and reduce the log viewer
(10) Log viewer List the entire info in event mode or text mode from all DVR servers.
i
There are a few Hot keys for quick switching between the different applications or display
mode on a single monitor system.
- F1: displays current DVR server information on the CMS application main screen
- F3: Switches to E-Map mode
- F4: Switches to Monitor mode
- Esc: Switches back to the CMS application main screen