Specifications

21
OSD MENU Description
1 2 3 4
80
5005
NETWORK SETU
P
IP MODE
NW ENABLE
VIDEO PORT
UPGARDE PORT
PPPOE
i
Please DO NOT cut off the power of the DVR system
while the firmware is upgrading. Power failure will
cause the permanent damage of the DVR system.
Use and buttons to go up and down and select
UPGRADE PORT
, and then press
or and to
move to the selection
. Use and buttons to change the
selections values and press
or to confirm.
USB BAKCU
P
TIME SET
START TIME
END TIME : 2006 / 05 / 05 13 : 08 : 13
: 2006 / 05 / 04 10 : 00 : 01
BACKUP CHANNEL
BACKUP SIZE
BACKUP EXECUTE
1 2 3 4
73GB 89MB
USB BACKUP:
Using USB device (ex. Pen drive or External Hard disk) to
backup partial recorded video and playback on PC.
Use and buttons to go up and down and select
USB BACKUP
, and then press
or
. Use and
to move left and right. And, use and buttons
to change the value and press
or
to confirm.
i
- Remember to plug in the USB device before
starting to backup.
- If the external hard disk is first time using, please
format to FAT32 format.
- The DVR system supports external hard disk
capacity up to 32GB.
- The external hard disk needs to be power by
external power.
1. Select the
START TIME
and
END TIME
.
2. Select the channels which user wants to backup.
3. The DVR system will display the system hard disk space
and backup file size.
4. And then, select
BACKUP EXECUTE
to start backup video
to the USB device.
5. When backup is done, press any key to back to main menu.
6. To view the backup file, using USB Playback
Application(see 4.3)